CONAC, Concrete Accessories Incorporated. Lifting, Chemicals, Spacers, Formwork, Concrete Product Solutions.

1-800-336-2598

Download Catalog

Exhibits

Order Catalog

Products

Home

DR LIFTING SYSTEM

DR ANCHORS
Economical and effective method for backstripping or face lifting in tension. The system Code is stamped on the head of each anchor to match with the correct lifting unit. Stocked in Hot dip galvanized; mill finish available on request.

Part Number	System Code	Length (L)	SWL TENSION (Ton)	Edge Distance	Body Diameter (B)	Base Diameter (C)	Head Diameter (D)	Head Recess (F)
		1-Ton
DRA01055HG	1.3	2-3/16”	0.75	8”	3/8”	1”	3/4”	3/8”
DRA01065HG	1.3	2-9/16”	0.98	9”	3/8”	1”	3/4”	3/8”
DRA01085HG	1.3	3-3/8”	1	12”	3/8”	1”	3/4”	3/8”
DRA01120HG	1.3	4-11/16”	1	12”	3/8”	1”	3/4”	3/8”
DRA01200HG	1.3	8”	1	12”	3/8”	1”	3/4”	3/8”
		2-Ton
DRA02045HG	2.5	1-3/4”	0.63	7”	9/16”	1-3/8”	1-1/16”	7/16”
DRA02055HG	2.5	2-3/16”	0.83	8”	9/16”	1-3/8”	1-1/16”	7/16”
DRA02070HG	2.5	2-3/4”	1.2	10”	9/16”	1-3/8”	1-1/16”	7/16”
DRA02085HG	2.5	3-3/8”	1.64	12”	9/16”	1-3/8”	1-1/16”	7/16”
DRA02120HG	2.5	4-11/16”	2	16”	9/16”	1-3/8”	1-1/16”	7/16”
DRA02140HG	2.5	5-1/2”	2	18”	9/16”	1-3/8”	1-1/16”	7/16”
DRA02170HG	2.5	6-11/16”	2	18”	9/16”	1-3/8”	1-1/16”	7/16”
DRA02280HG	2.5	11”	2	18”	9/16”	1-3/8”	1-1/16”	7/16”
		4-Ton
DRA04075HG	5	3”	1.54	11”	3/4”	2”	1-7/16”	5/8”
DRA04095HG	5	3-3/4”	2.21	13”	3/4”	2”	1-7/16”	5/8”
DRA04110HG	5	4-5/16”	2.8	15”	3/4”	2”	1-7/16”	5/8”
DRA04120HG	5	4-11/16”	3.22	16”	3/4”	2”	1-7/16”	5/8”
DRA04140HG	5	5-1/2”	4	19”	3/4”	2”	1-7/16”	5/8”
DRA04160HG	5	6-5/16”	4	21”	3/4”	2”	1-7/16”	5/8”
DRA04180HG	5	7-1/16”	4	21”	3/4”	2”	1-7/16”	5/8”
DRA04240HG	5	9-7/16”	4	21”	3/4”	2”	1-7/16”	5/8”
		8-Ton
DRA08120HG	10	4-11/16”	3.44	16”	1-1/8”	2-3/4”	1-7/8”	5/8”
DRA08135HG	10	5-5/16”	4.17	18”	1-1/8”	2-3/4”	1-7/8”	5/8”
DRA08150HG	10	5-15/16”	4.95	20”	1-1/8”	2-3/4”	1-7/8”	5/8”
DRA08170HG	10	6-11/16”	6.11	22”	1-1/8”	2-3/4”	1-7/8”	5/8”
DRA08220HG	10	8-7/8”	8	28”	1-1/8”	2-3/4”	1-7/8”	5/8”
DRA08250HG	10	9-7/8”	8	32”	1-1/8”	2-3/4”	1-7/8”	5/8”
DRA08340HG	10	13-3/8”	8	32”	1-1/8”	2-3/4”	1-7/8”	5/8”
		16-Ton
DRA16250HG	20	9-7/8”	12.66	32”	1-1/2”	3-7/8”	2-3/4”	5/8”
DRA16500HG	20	19-11/16”	16	61”	1-1/2”	3-7/8”	2-3/4”	5/8”

Allowable SWL based on 4:1 safety factor in 5,000 psi normal weight concrete.

EYE ANCHORS
Used primarily in thin pannels utilizing rebar to extend the shear cone.

Part Number	Tension System Code	Anchor Length (L)	Body Diameter (B)	Head Diameter (D)	Head Recess (F)	Hole Location (G)	Hole Diameter (H)	SWL (Ton)	Edge Distance
		1-Ton
DRO1065	1.3	2-9/16”	3/8”	3/4”	3/8”	2-1/8”	13/32”	1	9”
		2-Ton
DRO2090	2.5	3-5/8”	9/16”	1-1/16”	7/16”	3”	1/2”	2	12”
		4-Ton
DRO4090	5	3-5/8”	3/4”	1-7/16”	5/8”	2-11/16”	3/4”	4	12”
DRO4120	5	4-3/4”	3/4”	1-7/16”	5/8”	3-7/8”	3/4”	4	16”
		8-Ton
DRO8115	10	4-3/8”	1-1/8”	1-7/8”	5/8”	3-7/16”	1”	8	15”
DRO8180	10	7-1/16”	1-1/8”	1-7/8”	5/8”	6”	1”	8	21”
		16-Ton
DRO16250	20	9-7/8”	1-1/2”	2-3/4”	5/8”	8”	1-7/16”	16	32”

Allowable SWL based on 4:1 safety factor in 5,000 psi normal weight concrete.

Note: Headed Eye Anchors require use of bent rebar V through hole to develop tension capacity.

TENSION VEES

Nominal Sys.Capacity	Anchor Part No.	Required Rebar Size (R)	Bent Rebar Leg (P)
1 Ton	DRO1065	5/16"	10"
2 Ton	DRO2090	#3	13"
4 Ton	DRO4090	#5	16"
4 Ton	DRO4120	#5	16"
8 Ton	DRO8115	#7	20"
8 Ton	DRO8180	#7	20"
16 Ton	DRO16250	#10	33"

MAGNETIC RECESS FORMERS
This steel body is turned from solid material and fitted with a high-performance magnetic system, providing a high-powered magnet for locating DR Anchors in steel forms.

Part Number	System Code	Recess Diameter (D)	Recess Height (L)	Hole Diameter (H)	Thread Size
KA13M	1.3	2-3/8”	1-1/8”	13/16”	M8
KA25M	2.5	2-7/8”	1-5/16”	1-1/8”	M12
KA50M	5	3-11/16”	1-5/8”	1-1/2”	M12
KA75M	10	4-3/4”	2-1/8”	1-7/8”	M12

			Height (L)	Diameter (D)
KA13GM	Rubber Seal For Magnet		7/16”	13/16”
KA25GM	Rubber Seal For Magnet		1/2”	1-3/16”
KA50GM	Rubber Seal For Magnet		9/16”	1-1/2”
KA75GM	Rubber Seal For Magnet		3-4”	1-15/16”

RUBBER RECESS FORMERS
Used to Recess DR Anchors relative to the concrete surface. Each Rubber Recess Former requires one Wing Nut, Plate, and Stud Set to attach it to the form.

Part Number	System Code	Recess Diameter (D)	Recess Height (L)	Hole Dia. (H)
DRR01	1.3	2-5/16”	1-3/16”	3/8”
DRR02	2.5	2-7/8”	1-7/16”	9/16”
DRR04	5	3-11/16”	1-7/8”	3/4”
DRR08	10	4-5/8”	2-5/16”	1-1/8”
DRR16	20	6-3/8”	2-5/16”	1-1/2”

STEEL RECESS FORMER
Drilled and tapped to allow bolting directly to the form.
Can be welded to certain types of forms where location is permanent.

Part Number	System Code	Recess Diam. X Depth
DRS01	1.3	2-5/16” X 1-3/16”

WING NUT, PLATE & STUD SETS
Used to hold the DR Rubber Recess Formers to the formwork.

Part Number	System Code	Stud Dia. (D)	Stud Length (L)
DRW01A	1.3	M8	1-3/16”
DRW02A	2.5	M10	1-7/16”
DRW04A	5	M10	1-7/8”
DRW08A	10	M10	2-5/16”
DRW16A	20	M10	2-5/16”

DR ANCHOR THREADED PLATES
Can be used with stud or bolt recess former to form.

Part Number	System Code	Threads
DRWP01	1.3	M8
DRWP02	2.5	M10
DRWP04	5	M10
DRWP08	10	M10

DR ANCHOR PLASTIC CAPS
Protective caps attach to head of DR anchor to prevent debris from filling the recess.

ITEM #	System Code	Description
DRR01 CAP	1.3	DR-ANCHOR 1 TON PLASTIC CAP
DRR02 CAP	2.5	DR-ANCHOR 2 TON PLASTIC CAP
DRR04 CAP	5	DR-ANCHOR 4 TON PLASTIC CAP
DRR08 CAP	10	DR-ANCHOR 8 TON PLASTIC CAP

DR-ANCHOR LIFTING UNITS
For use with DR Anchors. Lifting Eye rotates on the anchor to the direction of load. The system Code is stamped on each unit to match with the correct anchor type.

Part No.	System Code (t)	System Capacity (t)	head Dia. (mm)	Shaft dia. (mm)	D	H	h	B	s	d	f	Weight (lb/pc)
Lifting Eye 1T	1.3	1	19	10	52	200	73	32	11	45	72	2.18
Lifting Eye 2T	2	2	26	14	63	220	91	42	16	58	87	3.1
Lifting Eye 4T	5	4	36	20	82	275	111	57	22	68	116	7.08
Lifting Eye 8T	10	8	47	28	104	390	150	72	29	84	160	19.62
Lifting Eye 16T	20	16	69	39	153	520	210	109	41	115	187	48.4

See operation instruction for for the CONAC Lifting Eye here.