home | products | about us | order catalog | exhibits | links | contact us
	CHEMICALS Mold Release MR2000 MR2000 is an especially designed transfer agent used under Aggre-Tard Form Retarder to reduce clean up on forms. USE MR2000 was formulated for use under Aggre-Tard to aid in the transfer of the retarder film off of the form leaving the form clean for the next cast. ADVANTAGES ®Single coat application. ®No clean up of forms. ®Quick dry time. PREPARATION All forms must be clean and dry. Seal wood and concrete forms with CONAC Form Coat Epoxy 2000. APPLICATION Apply MR2000 by spray, brush or roller. MIXING Material must be mixed prior to use by mechanical or manual means. LIMITATIONS MR2000 is not a release agent or form oil. It is a transfer agent to be used under Aggre-Tard form retarder. PRECAUTIONS Rubber gloves or protective creams should be worn. Use in a well ventilated area with appropriate breathing apparatus available. CLEAN UP Sprayers and other application equipment can be cleaned with soap and water. COVERAGE RATE Apply material at a rate of 400 square feet per gallon. PACKAGING Supplied in 5 & 55 gallon containers. SHELF LIFE One year if stored in original unopened container. V.O.C. 750 g/l (6.51 lbs/gal)     800-336-2598 www.conacweb.com