|
TECHNICAL DATA
Viscosity -- 60-100 SUF
Flash Point -- 290° to 310°
Pour Point -- -20°F
Color - Amber
PRODUCT DESCRIPTION
A high quality chemically reactive, ready to use, form release compound consisting of highly refined petroleum based ingredients. V.O.C. compliant.
GENERAL USES
For use on formwork prior to casting concrete, to achieve a clean, architectural release.
FEATURES
• Has a controlled reaction with the free lime in concrete to provide a clean release without the use of pry-bars or tools
• Produces smooth natural architectural surfaces - concrete surface voids are eliminated or reduced - oil stains are eliminated
• Has a controlled reaction with the concrete and will not retard, etch, or soften concrete surfaces, even if over applied
• Is a heavy viscosity material that forms a tough, clinging film even on dense materials such as plastic or fiberglass forms
• Run-down is reduced and reinforcing steel stays cleaner
• May be used on concrete structures that will store potable water
• Has a positive release that keeps forms clean - little, if any, cleaning is necessary between pours
• Repeated use makes wood forms water-repellent and extends their useful life
• Formulated with a rust inhibitor - a light coat immediately upon stripping steel forms will prevent rust for weeks
• Will not stain even white concrete
• Has no deleterious effect upon the natural bonding characteristics of secondary toppings or coatings, caulks or sealants
SPECIFICATIONS
Corps of Engineers specification CW 03101, Section 2.1.2.
INSTRUCTIONS FOR USE
BioForm should be applied in a thin uniform film with a sprayer, brush, or roller. No special application equipment is necessary, but a spray application is the most practical. Ponding or pudding is to be avoided. Specific application rates are as follows:
2500 sq. ft. per U.S. gallon on:
Fiberglass
Plastic
Steel
Aluminum
High density, overlaid plywood
Elastomeric form liners
| 2000 sq. ft. per U.S. gallon on:
Medium density, overlaid plywood
Urethane coated plywood
Coated paper forms | 1200 sq. ft. per U.S. gallon on:
Dimensional lumber
Rough sawn lumber
Striated plywood | 1500 sq. ft. per U.S. gallon on:
BB grade plyform | |
PACKAGING
55 gallon drums
5 gallon drums
275 gallon totes
LIMITATIONS/PRECAUTIONS
Do not use styrofoam or latex molds. Do not use on plastic molds unless coated with a sealer. Colder temperatures will increase the viscosity of Maximum. Combustible...Contains petroleum distillates. Keep out of reach of children. Do not take internally. Do not breathe vapors. Avoid prolonged contact with skin. If swallowed, do not induce vomiting - call physician.If splashed in eyes, wash repeatedly with clean water and call physician. Keep away from heat, sparks and open flame. Recommended safety Equipment: Rubber gloves, goggles and if applied in areas of poor ventilation, use mine safety
appliances, mask and canister.
|
