|
A - A ANCHORS
|
|
| |
 |
| |
| A - Anchor Lifting System |
The Conac A - Anchor Lifting System is versatile and economical, easy to work with in precast concrete plants as well as on-site handlings.
The system utilizes a standard hook or clevis, eliminating the need for specialized lifting hardware for the various loads. |
| A - Anchor |
| 4CA14 |
4 |
3,500 |
5,400 |
9" |
| 5CA14 |
5 |
5,500 |
8,500 |
10" |
| 5CA18 |
5 |
6,000 |
9,300 |
10" |
| 6CA14 |
6 |
6,500 |
10,100 |
12 1/2" |
| 6CA18 |
6 |
7,500 |
11,600 |
12 1/2 " |
| 8CA18 |
8 |
13,000 |
20,000 |
15 1/2 " |
| A-PRF-1 |
|
|
|
|
|
|
| |
| A - Anchor Dimensions |
The A-Anchor is available in two diameters and various lenghts for specific concrete thickness. The A-Anchot can be seen either 90° or 45° angle using the apropiate recess former. |
| 4CA14 |
.55" |
6.300" |
3.150" |
.59 lbs. |
| 5CA14 |
.55" |
8.260" |
3.740" |
.75 lbs. |
| 5CA18 |
.70" |
8.681" |
3.740" |
1.48 lbs. |
| 6CA14 |
.55" |
10.551" |
4.724 |
.94 lbs. |
| 6CA18 |
.70" |
9.055" |
4.724" |
1.73 lbs. |
| 8CA18 |
.70" |
12.283" |
6.732" |
2.25 lbs. |
|
|
| |
| A-Anchor Rubber Recess Former |
The A-Anchor Rubber Recess Former are manufactured in 90° angles. The recess former properly sets 3/4" below the surface of the concrete. |
|
| CRRF9014 |
9.00" |
3" |
3.25" |
1.40 lb |
Red |
| CRRF9018 |
9.00" |
3" |
3.25" |
1.40 lb |
Black |
| CRRF9014-4 |
9.00" |
3" |
4" |
1.60 lb |
Yellow |
| CRRF9018-4 |
9.00"
|
3" |
4" |
1.60 lb |
Green |
|
|
| |
|
| A - Anchor Magnetic Recess Plate |
|
|
The A-Anchor Magnetic Recess Plate offer the versatility to attach the Rubber Recess Former to any steel form eliminating bolting or welding.
|
|
| |
|
| A - Anchor Setting Plate & A-Anchor Setting Rod |
The A-Anchor Setting Plate and Setting Rod are used in various applications to install A-Anchors in a form.
The Setting Rod is used to set the recess former in place by way of predilled hole |
|
| |
| A-Anchor Hand Setting Plate |
|
The Hand Setting Plate offers a clean accurate system that allows easy installation of the recess rubber with anchor into the concrete. First, put together Anchor, Recess Rubber and Hand Setting Plate. Second, entire assembly is then floated into back face of concrete to a level position. Finally, after concrete has set-up, remove hand setting plate first then recess rubber |
|
| |
|
|
| |
|
| 800-336-2598 |
| www.conacweb.com |
| |
